AT&T 1855 - AT&T Corded Phone, Руководство пользователя

Страница: 15 / 17

27
Appendix
26
Appendix
In case of difficulty
If you have difficulty with your phone, please try the suggestions below. For Customer
Service, visit our web site at www.telephones.att.com , or call 1 800 222–3111.
Telephone does
not work at all • Make sure the AC adapter is plugged into an outlet not controlled by
a wall switch.
• Make sure the line cord is plugged firmly into the telephone and the
modular jack (see page 5).
Telephone does
not ring • Make sure the ringer is on (see page 8).
• Make sure the telephone line cord and AC adapter are plugged in
properly (see page 5).
• You might have too many extension phones on your telephone line to
allow all of them to ring. Try unplugging some of them.
If you hear
noise or
interference
during a call • Appliances plugged into the same circuit as the telephone can cause
interference. Try moving the appliance or telephone to another outlet.
• Disconnect the telephone from the modular jack and connect another
telephone. If calls are still not clear, the problem is probably in your
wiring or local service. Call your local telephone service company.
MEMO
ANNC
CA
LLE
R ID / MESSAG
ES
“Beep-Beep-Beep-Beep-Beep”
(5 quick beeps)
Error tone (current operation has been
unsuccessful; try again).
Icons, tones & indicator lights
“Beep”
(1 quick beep)
Confirmation tone (procedure completed).
“Beep-Beep-Beep”
(3 quick beeps, repeated)
Priority call alert (caller has entered
priority call code; see page 21).
Alert tones
Indicator lights
MEMO
ANNC
CA
LLE
R ID / MESSAGE
S
MUTE
On when microphone is muted.
SPEAKER
On when speakerphone is in use.
NEW CALL
On when new call(s) received since
Caller ID log last reviewed.
ANSWERING SYSTEM
On
: Answering system is on.
Off : Answering system is off.
Flashing : New message(s) received
Status icons
Ringer is off (see page 8).
NEW New call received (see page 14).
REP
Repeat call from same number (see page 14).
No.
Call number (see page 14).
ERR Error (current operation has been unsuccessful; try again).
MSG#
Message number (see page 17).
CL
If flashing, set answering system clock (see page 18).
CL
MSG#
NEW
REP
No:
1
ERR
ATT-1855CIB-d04.qxd 3/19/05 5:09 PM Page 26