To interrupt playback:
To interrupt message playback, press and release #.
To resume playing messages at the point where you stopped, press and release 5 or 7. To resume playing at
the beginning of the current message, press and release 2.
To save your messages:
To save messages you’ve just heard, simply hang up the telephone. Any new messages will be recorded
after the saved messages.
To repeat a message:
To repeat a message, press and release 2. The system returns to the beginning of the message and resumes
playing. You can press 2 repeatedly to replay an earlier message.
To search backward through a message (review):
To search backward through a message, hold down 2. To resume playing the message, release 2.
To search forward through a message (cue):
To search forward through a message, hold down 5. To resume playing the message, release 5.
To skip a message:
To skip a message, press and release 5. The system will stop playing, skip to the beginning of the next
message, and resume playing. The system advances one message each time you press 5.
To replay all messages:
After all of your messages have been played and you hear “End of messages” followed by 2 beeps, press
and release 7. The system replays all of your messages.
To delete selected messages:
To delete only a selected message, press and release 3 while the message is playing. To be sure you delete
the right message, you must press 3 before the beep that indicates the end of the message.
If necessary, you can press 2 to replay the message after listening to it, then press 3 when you are sure you
are deleting the right message.
To delete all messages
If you do not want to save any of your messages, press and release 3 3 after you listen to all your messages
and hear the two-beep signal. The system erases all messages and memos that are stored in memory.
Recording a Memo
After you listen to your messages, you can record a memo to yourself or other members of the household.
1.
After you hear 2 beeps, press and release *. The system will beep and begin to record.
2.
Speak into the telephone in a normal tone of voice.
3.
When you are finished, press and release #.
This memo is counted as a new message.
Recording a New Announcement
1.
Dial your telephone number.
2.
Wait for the system to answer, then use the buttons on the telephone to enter your Remote Access
code.
