8
VIII- MAINTENANCE
Ensure;
to wipe the device using a damp cloth before it cools down.
that the device is cooled down before cleaning process.
not to use abrasive chemical cleaners and steel cleaning materials during cleaning process. (Use
chemical cleaners when necessary.)
to clean with a warm and soapy cloth.
If you haven't used the device for longer periods, apply vaseline on the surface of the device.
Never use pressurized steam or pressurized water for cleaning.
Do not use abrasive cleaning materials and hard-surface sponges as well as abrasive stain
removers.
Wipe with a damp cloth before the stain is dried and then dry the surface using a clean cloth.
IX
– PRE-ASSEMBLY INSTRUCTIONS
Ensure that the following considerations are fully and properly performed before the assembly.
If assembly is
not possible as one of the following is missing;
transportation fees and hourly wage
shall be
charged from the customer.
Please note that;
- Gas pressure is available on the informative label of the device.
- Acting contrary to the information indicated is not recommended. Otherwise the device shall fall out of
the scope of the
warranty
.
- Never use high-pressure hood for LPG grills.
-
Gas grills are manufactured with LPG and NG (natural gas) upon request. Gas connection pipe is R½.
- If the gas grill is to be manufactured as LPG and then converted to natural gas, conversion should be
performed according to the gas table. See Page5
- After checking the gas table for conversion, injector diameters should also be considered according to
the gas pressure. See Page 5
