ATAGO NAR-2T Скачать руководство пользователя страница 5

Страница: 5 / 55

Handling of this instrument (Continued)

CAUTION

The prism is made of optical glass. Do

not tap or contact its surface with any

metal tool such as a spoon or

tweezers.

If the surface of the prism is damaged,

inaccurate measurements will occur.

After taking a measurement, completely

wipe off any sample on the surface of the

prism and surrounding area with tissue

paper soaked in water.

Then remove any remaining moisture

completely with dry tissue paper.

If you have measured a sample of

polymer or fats and oils, wipe it off with

tissue paper soaked in alcohol or

neutral detergent.

Then remove any remaining moisture

completely with dry tissue paper.

Always turn off the power switch after

use.

When transporting the instrument,

place it in its original box.

Carefully read this instruction manual and fully understand the function and operation of

each part of the instrument before use.

Check that each part of the instrument operates normally before use.

Check the necessary operations such as calibration according to the instruction manual.

The manufacturer shall not be held responsible for any or all damages as a result of use

of the instrument for those other than its intended purposes (measurement of Brix, Refractive

Index, Concentration).

The prism mounted on the sample stage that is in contact with a sample under measurement

is a consumable item.

Ensure that if use of the instrument has undesired effects on the consumption of the

measured materials, etc., ATAGO shall not be held responsible for the result.

ە
ە
ە

1. Precautions for use

Содержание NAR-2T
























































Результаты поиска

Содержание NAR-2T

Отзывы:

Бренды по названию

Популярные бренды

ATAGO NAR-2T, Инструкция по эксплуатации

Результаты поиска

Содержание NAR-2T

Отзывы:

Бренды по названию

Популярные бренды