22
(3) Change from Brix Mode to nD
①
During measurement, the READING light blinks,
and the display will show Brix (%) readings (Fig.
10-4).
By pressing the START/STOP key, the READING
light will turn off, and "StoP" will display, ceasing
measurement (Fig. 10-2).
The "Brix (%)" light will remain illuminated.
②
Press SCALE until the "nD" light blinks, indicating
refractive index mode is selected.
③
Press ENTER to confirm this selection.
The "nD" light will remain illuminated.
Fig. 10-4
④
Press START/STOP to resume measurement.
The READING light will blink and measurements
will be displayed as nD values (Fig. 10-5).
Fig. 10-5
(4) Change from Brix Mode to Conc
①
During measurement, the READING light blinks,
and the display will show Brix (%) readings (Fig.
10-4).
By pressing the START/STOP key, the READING
light will turn off, and "StoP" will display, ceasing
measurement (Fig. 10-2).
The "Brix (%)" light will remain illuminated.
②
Press SCALE twice and the "Conc" light blinks,
indicating Conc mode is selected.
③
Press ENTER to confirm this selection.
The "Conc" light will remain illuminated.
④
Press START/STOP to resume measurement.
The READING light will blink, and measurements
will be displayed as Conc values (Fig. 10-6).
In case of a concentration scale (Conc) not
programmed, "- - - -" will display.
Fig. 10-6
Содержание 3577
Страница 1: ...3577 E01 In line Refractometer PRM TANK100 FER Instruction Manual Cat No 3577 ...
Страница 2: ......
