Atag MX4211AUU, Руководство пользователя

Страница: 46 / 52

46
Troubleshooting
If you have problems with your oven, try the solutions suggested below. They
may save you the time and inconvenience of an unnecessary service call.
►
Food remains uncooked .
●
Ensure timer has been set correctly and START button pressed .
●
Firmly close door .
●
Make sure you have not blown a fuse or triggered a circuit breaker .
►
Food is either overcooked or undercooked .
●
Make sure appropriate cook time was used .
●
Make sure appropriate power level was used .
►
Sparking and cracking (arcing) occur inside the oven .
●
Make sure you are using proper cookware without metal trimmings .
●
Make sure no forks or other metal utensils have been left inside the oven .
●
If using aluminum foil, make sure it is not too close to inside walls .
►
The oven causes interference with radios or televisions .
●
Slight interference on televisions or radios may occur when the oven is operating .
To minimize this effect, try to install oven away from televisions, radios and aerials .
►
Electronic interference causes DISPLAY to be reset .
●
Disconnect the power plug and reconnect it . Reset the time .
►
Condensation appears inside the oven .
●
This is a normal occurrence . Simply wipe away after cooking .
►
The fan continues to operate after the oven has been turned off .
●
This is a normal occurrence . Cooling fan may continue to operate for up to three
minutes after oven has been turned off .
► Air flow is detected around the door and outer casing.
●
This is a normal occurrence .
► Light reflection around the door and outer casing.
●
This is a normal occurrence .
►
Steam escapes from around the door or vents .
●
This is a normal occurrence .
►
A clicking sound occurs while the oven is operating, especially in defrosting mode .
●
This is a normal occurrence .
MX4211AUU_A01-03208V_EN.indd 46 2009-12-25 1:02:53