Atag IGT9472MB, Инструкция по эксплуатации

Страница: 55 / 72

EN 21
Bridge induction
The Bridge induction zones can be linked to each other. This creates 1
large zone that can be used, for example, for a large fish pan or various
pans on the same power.
• If the Bridge induction zones are linked, they cannot be set to boost
and the menu functions cannot be used.
• Use a fish or other pan that covers at least one of the Bridge
induction zones in the middle.
Switching on the Bridge function
1. Place a large pan on both cooking zones so that both zones are
well covered.
2. Switch on the front cooking zone.
3. Press the bridge button of the front slide zone control for two
seconds to select the bridge setting.
‘br’ will appear in the display of the rear zone. The rear zone can no
longer be controlled. Both zones are heated according to the setting
set in the front cooking zone.
4. Slide over the front slide control with your finger (clockwise) or tap
on the slide control with your finger to set the desired setting.
Switching off the Bridge function
1. Press the bridge button of the front slide control for two seconds to
switch off the bridge setting.
The bridge function switches off, the rear cooking zone display dims
and setting 1 appears in the front cooking zone display.
Or:
2. Press the on/off button of the front cooking zone to switch off both
cooking zones.
You will hear a single audio signal and the display dims. The
cooking zone has been switched off completely.
INDUCTION OPERATION