EN 22
Switching off
Switching off one cooking zone
Press the on/off button of the cooking zone you want to switch off.
You will hear a single audio signal and the slider dims.
• If all cooking zones have been switched off in this way, the hob
will automatically be in the standby mode (also refer to ‘standby
mode’).
Switching off all cooking zones
Press the key button briefly to switch off all the cooking zones at the
same time.
A single audio signal sounds. The red light next to the key button will
flash slowly.
• The hob is now in eco standby mode (see also ‘eco standby
mode’).
Automatic cooking programs
Each induction zone is equipped with 6 automatic cooking programs.
You can set any end time of an automatic cooking program with the aid
of the kitchen timer function (refer to page 17).
The cooking programs are based on regular quantities.
This function works best with pans recommended by ATAG (please
refer to www.atag.co.uk).
These menu functions work best if they are started at the beginning of
the cooking process.
To set an automatic program
The cooking zone is switched on.
• Press the menu button.
A series of 6 icons will light up, 1 of which brighter than the others.
• Again press the menu button, or press and hold down the menu
button to go to the next menu function.
The selected cooking program automatically starts after 3 seconds.
An ‘A’ for ‘automatic’ appears in the display.
If an automatic cooking program is active, you can go back to the
manual cooking process by tapping the slide control with your finger:
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
INDUCTION OPERATION
Содержание IGT9472MB
Страница 1: ...gebruiksaanwijzing gas inductiekookplaat instructions for use gas induction hob IGT9472MB ...
Страница 36: ...NL 36 ...
Страница 70: ...EN 36 ...
Страница 71: ...EN 37 ...