User manual ATAG iC, iS and iR-Range
5
2 Safety
Work on the installation should only be carried out by qualified personnel with calibrated
equipment. When replacing parts, only ATAG Service components may be used.
The device may be operated only by authorized persons who have been
instructed on the operation and use of the device. Improper use may cause
damage to the device and / or to the connected installation.
The appliance is not to be used by children or persons with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction.
Children being supervised not to play with the appliance.
If you smell gas:
-
No naked flames! No smoking!
-
Do not switch lights on or off or use other electrical switches.
-
Do not use the phone
-
Close the gas mains
-
Open windows and doors
-
Warn the occupants and leave the building
-
Only call the gas company or installer once you are outside the building.
Corrosion protection
Do not use sprays, chlorine-containing cleaning products, solvents, paints etc. in the
vicinity of the device or its air supply. These substances have an adverse impact on the
device and can lead to corrosion that may result in failures.
Checking the heating water
Always use potable water for filling the installation.
Adding chemical agents such as frost and corrosion inhibitors are only to be added by your
installer.
If in doubt, check with your installer or ATAG Heating Technology Ltd.
