background image

User manual ATAG iC, iS and iR-Range 

14

7  Maintenance

Conclude a maintenance agreement with your installer in order to have the installation 

periodically checked and adjusted.

The cover of the boiler consists of metal and plastic parts, which can be cleaned with a 

normal (non-aggressive) cleansing agent.

8 Warranty

For the warranty conditions, see the Warranty Card that has been supplied with the boiler.

9  Disposal of the product

This product should be handed in at a designated collection point, e.g. by handing it in at 

a duly authorized reseller when purchasing a similar product, or at an authorized collection 

site for recycling products which contains electrical and electronic equipment (EEE) and 

batteries and accumulators. Because of the potentially hazardous substances that usually 

accompany EEE, improper handling of this type of waste could have a possible impact on 

the environment and human health.

Your cooperation in the proper disposal of this product will contribute to the effective usage 

of natural resources.

For more information on recycling this product, please contact your city office, local waste 

disposal facilities, official service for chemical waste, landfill site, or your supplier.

Содержание IC series

















Отзывы: