EN 28
Symptom
Possible cause
Solution
The pans make a noise while
cooking.
This is caused by the energy
flowing from the hob to the
saucepan.
This is normal for certain
pans at a high cooking
setting. This is not harmful for
the pans or hob.
You have switched a cooking
zone on but the display keeps
flashing.
The pan you are using is not
suitable for induction cooking
or has a diameter of less than
12 cm.
Use a suitable pan (see pages
10 and 11).
A cooking zone suddenly
stops working and you hear
a signal.
The preset time has ended.
Switch the signal off by
pressing on the - or + key of
the timer.
The hob is not working
and nothing appears in the
display.
There is no power supply
due to a defective cable or a
faulty connection.
Check the fuses or the
electric switch (if there is no
plug).
A fuse blows as soon as the
hob is switched on.
The hob has been wrongly
connected.
Check the electrical
connections.
'BR' appears in the display
and the operation does not
react.
The bridge function is
switched on.
Switch the bridge function off
(see page 14).
After you have switched on
a cooking zone, another
cooking zone that was being
used with an automatic
cooking program is
simultaneously stopped.
This is a safety function.
The maximum power of
the combination of cooking
settings was exceeded.
Reset the automatic cooking
program and use a lower
setting for the other cooking
zone.
Fault code E1 and E3 / the
red child lock indication and
the pause indication are
illuminated.
Software error
Disconnect the appliance
for a short moment from
the power supply. Contact
the service department if
the error code does not
disappear.
Fault code E2 / the red child
lock indication and the pause
indication are illuminated.
The control panel is dirty or
has water on it.
Clean the control panel.
Fault code E4 and E5.
The wifi module is defect.
Contact the service
department.
Fault code E6
The appliance is connected
wrong to the power supply.
Contact the installer.
FAULTS
Содержание HI8471SVC
Страница 63: ...EN 33...
