Atag HG6411WEBA/A01, Инструкции по преобразованию

Страница: 16 / 32

EN 4
Note: Allowing an unqualified technician to carry out the work
described in these instructions can result in hazardous situations.
The supplier cannot be held liable for the consequences (hazardous
situations and/or injury to persons and/or damage) arising from the
failure of a technician who is not employed by the supplier to follow
these instructions. No compensation will be made for consequential
loss incurred as a result of the failure to follow these instructions.
This conversion set contains original parts. Original parts are tested
during the type approval testing of the appliance to verify that the
parts are suitable for the purpose and are safe. Regular inspections of
batches are carried out to assure the quality of original parts.
The supplier recommends that this service set should be installed by
one of the supplier’s technicians: Contact the service desk to make an
appointment with a service technician.
The address is shown on the appliance's warranty certificate.
Introduction (A)
These conversion instructions explain how to replace the supervario
wok burner parts to improve the burner's performance.
Tools
A. Socket spanner or box spanner
B. Flat-head screwdriver
C. Torx screwdriver
D. Phillips-head screwdriver
E. Needle-nose pliers
F. Open-end spanner
G. Leak-test spray
CONVERSION INSTRUCTIONS
7
4
T20
P2
7