ATA OACIS-2XC, Быстрое руководство по установке

Страница: 19 / 20

19
Move Jog.
ü You can move an axis forward or backward manually by operating COMMAND
menu. It comes in quite handy when you build the machine up for the first time
or some errors happen with high load.
ü You can open “ ” in Buttons or [TOOL] – [Command] button in the
Menu Strip.
ü Select a proper Axis then you can see “ADVANCE” and “RETRACT” buttons are
activated in blue
BRAKE COMMON
BRAKE
A2
B2
OACIS
SERVO CONTROLLER
MOTOR BRAKE
B1
A1
0V
0 VDC
CR
24V
+24 VDC
If a shot pin or air lock system is installed due to heavy tooling, you should pay
attention to jogging. You can make COMMAND disable by setting PROGRAM
STOP signal On when you want to prevent from moving by mistake with
locking on.