Asyril Asycube 240 Скачать руководство пользователя страница 4

Страница: 4 / 52

Asycube 240

Operating Manual

000.100.500

Version: A6

000.100.500

Asycube 240

- Operating Manual

4/52

1. Introduction

Generalities

The following document is the property of Asyril SA and may not be copied or circulated

without permission. The information contained in this document is subject to change without

notice for the purpose of product improvement. Before operating your product, please read

this document in order to ensure a correct use of the product. Nevertheless, if you meet

difficulties during the operation or the maintenance, please, feel free to contact Asyril

customer service.

In this manual, the safety precautions that you must respect are classified as: “Danger”,

“Warning” and “Note”; the following symbols are used:

DANGER!

Failure to observe the instruction may result in serious injury.

DANGER!

Failure to observe the instruction may result in electrocution or serious injury due to

electric shock

WARNING!

Failure to observe the instruction may result in injury or property damage.

NOTE :

The user should read carefully this information to ensure the correct use of the product,

although failure to do so would not result in injury.

REFER TO …

For more information on a specific subject, the reader should read other manual, or refer to

other paragraph.

WARNING!

Asyril shall not be liable whatsoever for any loss or damage arising from a failure to observe

the items specified in “Safety Precautions.” The customer is responsible to provide the

necessary instruction to the persons concerned.

NOTE :

All dimensions in this document are expressed in millimeters

Содержание Asycube 240





















































Результаты поиска

Содержание Asycube 240

Отзывы:

Похожие инструкции для Asycube 240

Бренды по названию

Популярные бренды

Asyril Asycube 240, Руководство по эксплуатации

Результаты поиска

Содержание Asycube 240

Отзывы:

Похожие инструкции для Asycube 240

Бренды по названию

Популярные бренды