Asyril Asycube 240, Руководство по эксплуатации

Страница: 33 / 52

Asycube 240
Operating Manual
000.100.500 Version: A6
000.100.500 Asycube 240 - Operating Manual 33/52
Locate the identification sticker at
the back of the product and ensure
that the product you have received is
the appropriate one.
Important information is on this
sticker; such as the power
consumption or the serial number
that you will need for any kind of
correspondence with Asyril.
Figure 3-1 : Product sticker
Installation and storage environment
WARNING !
The Asycube must be mounted on a smooth, flat and strong surface. Ensure yourself
that the Asycube is not submitted to mounting flexure. Failure to do so would degrade
feeder performance.
Installation environment
The Asycube can be used under following conditions:
- The asycube is IP20
- Working temperature: +5°C to +40°C
- Humidity: 30% to 80%max. non-condensing
WARNING !
In the case humidity or temperature variation, note that it might affect the global
performances of the Asycube.
- Avoid extreme electromagnetic waves, ultraviolet rays and radiation.
- Avoid using the product in a place where the main unit or controller may be exposed to water
or oil droplets.
- Clean room application: cleanliness class ISO7
WARNING !
Do not use the product in an atmosphere of corrosive gases. Rust may form and reduce
the structural strength of the product.
Storage environment
The storage environment should be similar to the operating environment. In addition, you
should protect the Asycube against dust
Asyril SA
– Switzerland
www.asyril.com
Article N° : xxx xxx xxx
Type: ASYCUBE-240
Input voltage 24VDC
Serial N°: xxxxxx