Rubber Track Loader
12. Loader Disassembly and Assembly
12-2
NOTICE
Collect and contain liquids in a suitable container. Dispose
of all liquids according to local regulations and mandates.
Note
: During disassembly, cap all hoses and fittings to
prevent fluid loss and contamination of the system fluids.
1.
Lower the loader arms onto a jackstand with the
arms resting about 6 inches off the ground.
2.
Turn the ignition switch to the OFF position.
Figure 12-1
12-001
3.
Remove the bolt on the pin assembly on the
loader tower.
Figure 12-2
12-002
4.
Remove the pin assembly.
Figure 12-3
12-003
5.
Remove and cap the hose on the base end of
the cylinder.
Figure 12-4
12-004
6.
Remove and cap the hose on the loader end of
the cylinder.
Figure 12-5
12-005
7.
Remove the forward pin assembly bolt.
Remove
Hose
Remove
Pin
Remove
Bolt
Remove
Hose
Remove
Bolt
Lift
Cylinder
