Rubber Track Loader
5. Operator Enclosure Disassembly and Assembly
5-3
Figure 5-7
5-007
2.
Remove the nut that secures the ignition switch
to the dash panel.
Figure 5-8
5-008
3.
Pull the ignition switch out from the rear of the
dash panel.
Figure 5-9
5-009
4.
Unplug the ignition switch connector.
Ignition Switch Installation
Figure 5-10
5-010
1.
Insert the ignition switch from the rear of the
dash panel.
Figure 5-11
5-011
2.
Install the nut that secures the ignition switch to
the dash panel.
Figure 5-12
5-012
3.
Plug in the ignition switch connector.
Remove Nut
Install Nut
