Rubber Track Loader
10. Transmission and Drive Disassembly and Assembly
10-2
Remove the oil filler cap only when the engine is
stopped and the machine has been allowed to cool
thoroughly.
NOTICE
Collect and contain liquids in a suitable container. Dispose
of all liquids according to local regulations and mandates.
Note
: During disassembly, cap all hoses and fittings to
prevent fluid loss and contamination of the system fluids.
1.
Lower the lift arms to the ground.
2.
Turn the ignition switch to the OFF position.
3.
Relieve any pressure from the auxiliary hydraulic
circuit.
4.
Drain the hydraulic fluid. Refer to
Chapter 13.
Hydraulic Fluid and Filter Change
.
5.
Remove the seat. Refer to
Chapter 6. Seat Re-
moval
.
Figure 10-1
10-001
6.
View with seat removed.
Figure 10-2
10-002
7.
Remove the access cover beneath the seat.
Figure 10-3
10-003
8.
Remove the bolts securing the flange fitting.
Figure 10-4
10-004
9.
Disconnect the fitting and tube from the pump.
Remove
Split
Flange
Remove
bolts
