ASV PT-80, Руководство по эксплуатации и обслуживанию

Страница: 36 / 72

Tilt-Up Cab
The ROPS/FOPS approved cab
(A) tilts up to allow easy access
to components while performing
maintenance. It is equipped with
a gas spring assist and a brace
mechanism to hold it in place
while tilted.
To tilt the cab:
1.
Remove any attachments
that may be fastened to the
machine.
2. (Optional) Raise the lift arms
and secure them with the lift
arm brace. (See page 34.)
3. Remove the two bolts (B)
that fasten the cab to the
footwell. They are located
inside the cab, one in each
of the lower front corners.
4. Once the bolts have been
removed, tilt the cab
slowly upwards. The
cab brace (C) should fall
onto the shoulder bolt (D)
locking the cab in its upright
position.
The cab is now secure.
To lower the cab:
1.
Raise the cab brace so
that the locking channel is
clear of the shoulder bolt.
2. Hold the brace upwards and
lower the cab until the
locking channel is clear of
the shoulder bolt then
release the brace.
3. The cab is now free to
be lowered into operating
position.
4. Lower the cab completely
and then fasten it to the
footwell with the two bolts
removed previously.
MAINTENANCE
Tilt Up R.O.P.S./F.O.P.S. Cab
35
C
D
B
A