manualshive.com logo in svg

Asus Z97-WS, Руководство пользователя

Поделиться
Скачать
Asus Z97-WS Скачать руководство пользователя страница 32

1-16

Chapter 1: Product introduction

Chapter 1

5. 

EPU switch

Enable this switch to automatically detect the current PC loadings and intelligently 

moderate the power consumption.

Enable this switch when the system is powered off.

• 

The EPU LED (OLED2) near the EPU switch lights up when the EPU switch is 

enabled. Refer to section

 1.2.8 Onboard LEDs

 for the exact location of the EPU LED.

• 

If you enable this switch under Windows

®

 OS environment, the EPU function will be 

activated after the next system bootup.

• 

You may change the EPU settings in the software application or BIOS setup program 

and enable the EPU function at the same time. However, the system will use the last 

setting you have made.

Z97-WS

Z97-WS EPU switch

Disable

(Default)

Enable

EPU

6. 

Clear CMOS button (CLR_CMOS)

Press this button to clear the BIOS setup information only when the systems hangs 

due to overclocking.

Z97-WS

Z97-WS CLR_CMOS button

Содержание Z97-WS



























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды