Asus Z97-WS Скачать руководство пользователя страница 129

Страница: 129 / 186

Z97-WS

3-57

Chapter 3

Load from Profile

This item allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the

profile number that saved your BIOS settings, press <Enter>, and then select

Yes

•

DO NOT shut down or reset the system while updating the BIOS to prevent the

system boot failure!

•

We recommend that you update the BIOS file only coming from the same memory/

CPU configuration and BIOS version.

Profile Name

This item allows you to key in a profile name.

Save to Profile

This item allows you to save the current BIOS settings to the BIOS Flash, and create a

profile. Key in a profile number from one to eight, press <Enter>, and then select

Yes

Load/Save Profile from/to USB Drive

This item allows you to load or save profile from your USB drive, load and save profile to your

USB drive.

3.9.2

ASUS O.C. Profile

This item allows you to store or load multiple BIOS settings.

Содержание Z97-WS



























































































































































































Результаты поиска

Содержание Z97-WS

Отзывы:

Бренды по названию

Популярные бренды

Asus Z97-WS, Руководство пользователя

Результаты поиска

Содержание Z97-WS

Отзывы:

Бренды по названию

Популярные бренды