C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
2 - 1 2
2 - 1 2
2 - 1 2
2 - 1 2
2 - 1 2
3.
Unhook the hinge-like tabs from the holes on the right side of the
front panel to completely detach the front panel assembly from the
chassis.
H i n g e - l i k e t a b
H i n g e - l i k e t a b
H i n g e - l i k e t a b
H i n g e - l i k e t a b
H i n g e - l i k e t a b
Before you can install a 5.25-inch drive, you should first remove the
front panel assembly (front bezel and front panel cover). The front panel
assembly is attached to the chassis through four h o o k e d t a b s
h o o k e d t a b s
h o o k e d t a b s
h o o k e d t a b s
h o o k e d t a b s on the
left side and four h i n g e - l i k e t a b s
h i n g e - l i k e t a b s
h i n g e - l i k e t a b s
h i n g e - l i k e t a b s
h i n g e - l i k e t a b s on the right side.
To remove the front panel assembly:
2.5
Front panel assembly
2.5.1
2.5.1
2.5.1
2.5.1
2.5.1
Removing the front panel assembly
Removing the front panel assembly
Removing the front panel assembly
Removing the front panel assembly
Removing the front panel assembly
2.
Pull and swing the left edge of
the front panel outward.
L o c k l e v e r
L o c k l e v e r
L o c k l e v e r
L o c k l e v e r
L o c k l e v e r
1.
Pull the lock lever (blue bar) on
the front edge of the chassis
outward to release the front
panel assembly.
