A S U S T W 5 1 0 - E 2
A S U S T W 5 1 0 - E 2
A S U S T W 5 1 0 - E 2
A S U S T W 5 1 0 - E 2
A S U S T W 5 1 0 - E 2
6 - 5
6 - 5
6 - 5
6 - 5
6 - 5
At the bottom section of the screen are the navigation keys. These keys
allow you to move through and select menu options.
Creating a RAID 0 set (Stripe)
Creating a RAID 0 set (Stripe)
Creating a RAID 0 set (Stripe)
Creating a RAID 0 set (Stripe)
Creating a RAID 0 set (Stripe)
To create a RAID 0 set:
1.
From the D e f i n e a N e w A r r a y
D e f i n e a N e w A r r a y
D e f i n e a N e w A r r a y
D e f i n e a N e w A r r a y
D e f i n e a N e w A r r a y menu, select R A I D M o d e
R A I D M o d e
R A I D M o d e
R A I D M o d e
R A I D M o d e, then
press <Enter>. A pop-up menu appears.
2.
Use the up or down arrow keys to select
S t r i p i n g
S t r i p i n g
S t r i p i n g
S t r i p i n g
S t r i p i n g, then press <Enter>.
Mirroring
Striping
Stripe Mirroring
Spanning
[F6] Back [F7] Finish [TAB] Navigate [
↑↓
] Select [ENTER] Popup
The navigation keys vary depending on the menu level or option.
3.
Press <TAB> to move to the S t r i p i n g B l o c k
S t r i p i n g B l o c k
S t r i p i n g B l o c k
S t r i p i n g B l o c k
S t r i p i n g B l o c k
option, then press <Enter>.
4.
Use the up or down arrow keys to select the
stripe block size appropriate to your drive
usage, then press <Enter>.
The available stripe size values range from 8KB to 128KB. The default
stripe size is 128 KB. You must choose the stripe size value based on
the projected drive usage. For low disk usage, select 8 KB/16 KB. For
typical disk usage, select 64 KB. Select 128KB for performance disk
usage.
8K
↑
↑
↑
↑
↑
16K
32K
64K
128K
Optim
↓
↓
↓
↓
↓
T I P .
T I P .
T I P .
T I P .
T I P . For server systems, use of a lower array block size is
recommended. For multimedia computer systems used mainly for audio
and video editing, a higher array block size is recommended for optimum
performance.
