Asus TS300-E9-PS4 Скачать руководство пользователя страница 81

Страница: 81 / 166

ASUS TS300-E9-PS4

4-23

16. Auxiliary panel connector (20-2 pin AUX_PANEL1)

This connector is for additional front panel features including front panel SMB, locator

LED and switch, chassis intrusion, and LAN LEDs.

1. Front panel SMB (6-1 pin FPSMB)

These connectors connect the front panel SMBus cable.

2. LAN activity LED (2-pin LAN1LINK and 2-pin LAN2LINK)

These connectors are for Gigabit LAN activity LEDs on the front panel.

3. Locator LED (2-pin AUX_LOCLED1 and 2-pin AUX_LOCLED2)

These connectors are for the Locator LED1 and LED2 on the front panel. Connect

the Locator LED cables to these 2-pin connector. The LEDs will light up when the

Locator button is pressed.

4. Locator Button/Switch (2-pin AUX_BMCLOCBTN)

These connectors are for the locator button on the front panel. This button queries

the state of the system locator.

Содержание TS300-E9-PS4







































































































































































Результаты поиска

Содержание TS300-E9-PS4

Отзывы:

Asus TS300-E9-PS4, Руководство пользователя, Страница: 81 / 166

Результаты поиска

Содержание TS300-E9-PS4

Отзывы: