Asus TS300-E9-PS4 Скачать руководство пользователя страница 28

Страница: 28 / 166

Chapter 2: Hardware Information

2-6

Close the load plate (A), ensuring that

the front edge of the load plate slides

under the retention lock (B) then push

down the load lever (C).

Retention

lock

Load lever

Insert the load lever under the retention tab to remove the PnP cap from the CPU

socket.

Retention tab

Load lever

Apply some Thermal Interface Material

to the exposed area of the CPU that the

heatsink will be in contact with, ensuring

that it is evenly spread in a thin layer.

Some heatsinks come with

pre-applied Thermal Interface

Material. If so, skip this step.

The Thermal Interface Material is

toxic and inedible. DO NOT eat it.

If it gets into your eyes or touches

your skin, wash it off immediately and

seek professional medical help.

Содержание TS300-E9-PS4







































































































































































Результаты поиска

Содержание TS300-E9-PS4

Отзывы:

Asus TS300-E9-PS4, Руководство пользователя, Страница: 28 / 166

Результаты поиска

Содержание TS300-E9-PS4

Отзывы: