Asus TS300-E9-PS4 Скачать руководство пользователя страница 79

Страница: 79 / 166

ASUS TS300-E9-PS4

4-21

13. VGA connector (16-1 pin VGA_HDR1)

This connector supports the VGA High Dynamic-Range interface.

•

DO NOT forget to connect the 24-pin and the 8-pin power plugs; otherwise, the system

will not boot up.

•

Use of a power supply unit (PSU) with a higher power output is recommended when

configuring a system with more power-consuming devices. The system may become

unstable or may not boot up if the power is inadequate.

•

This motherboard supports ATX2.0 PSU or later version.

•

Ensure that your PSU can provide at least the minimum power required by your

system.

14. ATX power connectors (24-pin EATXPWR1, 8-pin EATX12V1)

These connectors are for the ATX power supply plugs. The power supply plugs are

designed to fit these connectors in only one orientation. Find the proper orientation and

push down firmly until the connectors completely fit.

Содержание TS300-E9-PS4







































































































































































Результаты поиска

Содержание TS300-E9-PS4

Отзывы:

Asus TS300-E9-PS4, Руководство пользователя, Страница: 79 / 166

Результаты поиска

Содержание TS300-E9-PS4

Отзывы: