Asus TS300-E9-PS4 Скачать руководство пользователя страница 31

Страница: 31 / 166

2-9

ASUS TS300-E9-PS4

2.2.4

Installing the CPU heatsink in rack

The Intel

LGA1151 processor requires a specially designed heatsink to ensure optimum

thermal condition and performance.

Peel off the sticker on the heatsink metal

plate and affix the plate to the back of

the motherboard, matching the standoffs

to the heatsink screw holes.

Use a Phillips screwdriver to tighten

the four heatsink screws using the

recommended sequence below.

•

Ensure that the heatsink is not skewed or tilted, otherwise the CPU will overheat.

•

Do not overtighten the screws. Doing so can damage the CPU.

•

Ensure that you use qualified heatsink assembly only.

•

Ensure that you have applied the thermal interface material to the top of the CPU

before installing the heatsink and fan.

Содержание TS300-E9-PS4







































































































































































Результаты поиска

Содержание TS300-E9-PS4

Отзывы:

Asus TS300-E9-PS4, Руководство пользователя, Страница: 31 / 166

Результаты поиска

Содержание TS300-E9-PS4

Отзывы: