manualshive.com logo in svg

Asus TS300-E4, Руководство пользователя, Страница: 212 / 224

Поделиться
Скачать
Asus TS300-E4 Скачать руководство пользователя страница 212

7-16

Chapter 7: Driver installation

7.2.2 

Red Hat® Enterprise Linux

Follow these instructions when installing the Broadcom® Gigabit LAN controller 

base driver for the Red Hat® Enterprise ver. 3.0 operating system.

Building the driver from the TAR file

Install first the Kernel Development tools before building the driver from the TAR 

file:

To install the kernel development application:

1.  Insert the Liunx OS installation CD disk 1 to the optical drive.
2.  Double click Application > System setting > Add/Remove application.

3.  Select Kernel Development from the development tools.

4.  Follow the instructions on the screen to finish installation.
To build the driver from the TAR file:
1.  Create a directory and extract the TAR files:

 

tar xvzf tg3-<version>.tar.gz

2.  Build the driver bcm5700.o as a loadable module for the running kernel: 

  cd tg3-<version>/src 

  make

3.  Test the driver by loading it: 

  insmod tg3.o

4.  Install the driver and man page: 

  make install

5.  Refer to Red Hat distribution documentation to configure the network protocol 

and address.

The Broadcom LAN driver for Linux OS is located in :\Drivers\BCM5721 LAN\

B57BCMCD_SV_943\Linux\Driver.

Содержание TS300-E4

































































































































































































































Отзывы:

Нет отзывов