Asus RS700-E8-RS8 Series Скачать руководство пользователя страница 60

Страница: 60 / 198

Chapter 4: Motherboard information

4-10

4.3

Internal connectors

Serial ATA connectors (7-pin SATA1–2 [Blue])

These connectors, controlled by Intel

C612 chipset, are for the Serial ATA signal

cables for Serial ATA hard disk drives (SATA 5 connector for optical drive use by

default).

USB 2.0 connectors (10-1 pin USB56, USB78, Type A USB10)

The USB56 and USB78 connectors are for USB 2.0 ports. Connect the USB module

cable to the connectors, and then install the module to a slot opening at the back of

the system chassis. The USB10 connector is for a A-type internal USB 2.0 device.

The USB connectors comply with USB 2.0 specification that supports up to 480 Mbps

connection speed.

The USB port module is purchased separately.

If the M.2 slot is occupied, the SATA6G_6 slot will be disabled.

Содержание RS700-E8-RS8 Series







































































































































































































Результаты поиска

Содержание RS700-E8-RS8 Series

Отзывы:

Asus RS700-E8-RS8 Series, Руководство пользователя, Страница: 60 / 198

Результаты поиска

Содержание RS700-E8-RS8 Series

Отзывы: