Asus P8Z77-V LE V3 Скачать руководство пользователя страница 91

Страница: 91 / 156

ASUS P8Z77-V LE

3-27

Chapter 3

CPU Temperature / MB Temperature [xxxºC/xxxºF]

The onboard hardware monitor automatically detects and displays the CPU and motherboard

temperatures. Select

Ignore

if you do not wish to display the detected temperatures.

CPU Fan Speed [xxxx RPM] or [Ignore] / [N/A]

PWR Fan Speed [xxxx RPM] or [Ignore] / [N/A]

Chassis Fan 1/2 Speed [xxxx RPM] or [Ignore] / [N/A]

The onboard hardware monitor automatically detects and displays the CPU, chassis,

and power fan speed in rotations per minute (RPM). If the fan is not connected to the

motherboard, the field shows

N/A

. Select

Ignore

if you do not wish to display the detected

speed.

CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage

The onboard hardware monitor automatically detects the voltage output through the onboard

voltage regulators. Select

Ignore

if you do not want to detect this item.

CPU Q-Fan Control [Enabled]

[Disabled]

Disables the CPU Q-Fan control feature.

[Enabled]

Enables the CPU Q-Fan control feature.

CPU Fan Speed Low Limit [200 RPM]

This item appears only when you enable the

CPU Q-Fan Control

feature and allows you to

disable or set the CPU fan warning speed.

Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]

CPU Fan Profile [Standard]

This item appears only when you enable the

CPU Q-Fan Control

feature and allows

you to set the appropriate performance level of the CPU fan.
[Standard] Sets to [Standard] to make the CPU fan automatically adjust depending on

the CPU temperature.

[Silent]

Sets to [Silent] to minimize the fan speed for quiet CPU fan operation.

[Turbo]

Sets to [Turbo] to achieve maximum CPU fan speed.

[Manual] Sets to [Manual] to assign detailed fan speed control parameters.

The following four items appear only when you set

CPU Fan Profile

to [Manual].

CPU Upper Temperature [70]

Use the <+> and <-> keys to adjust the upper limit of the CPU temperature. The values range

from 40ºC to 90ºC.

CPU Fan Max. Duty Cycle(%) [100]

Use the <+> and <-> keys to adjust the maximum CPU fan duty cycle. The values range from

20% to 100%. When the CPU temperature reaches the upper limit, the CPU fan will operate at

the maximum duty cycle.

CPU Lower Temperature [20]

Displays the lower limit of the CPU temperature.

Содержание P8Z77-V LE V3





























































































































































Результаты поиска

Содержание P8Z77-V LE V3

Отзывы:

Asus P8Z77-V LE V3, Руководство пользователя, Страница: 91 / 156

Результаты поиска

Содержание P8Z77-V LE V3

Отзывы: