Asus P8Z77-V LE V3 Скачать руководство пользователя страница 41

Страница: 41 / 156

ASUS P8Z77-V LE

2-21

Chapter 2

2.2.8

Internal connectors

Intel

Z77 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1/2 [gray])

These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0

Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10

configuration with the Intel

Rapid Storage Technology through the onboard Intel

Z77

chipset.

• These connectors are set to [AHCI Mode] by default. If you intend to create a Serial

ATA RAID set using these connectors, set the

SATA Mode

item in the BIOS to [RAID

Mode]. Refer to section

3.5.3 SATA Configuration

for details.

•

Before creating a RAID set, refer to section

4.5 RAID Configurations

or the manual

bundled in the motherboard support DVD.

• When using NCQ, set the

SATA Mode

in the BIOS to [AHCI Mode]. Refer to section

3.5.3 SATA Configuration

for details.

• You must install Windows

XP Service Pack 3 or later versions before using Serial

ATA hard disk drives. The Serial ATA RAID feature is available only if you are using

Windows

XP SP3 or later versions.

SATA6G_2

SATA

SATA_T

SATA6G_1

SATA_R

TA_T

SATA

_TX

P8Z77-V LE

P8Z77-V LE SATA 6.0Gb/s connectors

Serial port connector (10-1 pin COM1)

This connector is for a serial (COM) port. Connect the serial port module cable to this

connector, then install the module to a slot opening at the back of the system chassis.

The serial port bracket (COM1) module is purchased separately.

P8Z77-V LE

P8Z77-V LE Serial port (COM1) connector

PIN 1

COM1

Содержание P8Z77-V LE V3





























































































































































Результаты поиска

Содержание P8Z77-V LE V3

Отзывы:

Asus P8Z77-V LE V3, Руководство пользователя, Страница: 41 / 156

Результаты поиска

Содержание P8Z77-V LE V3

Отзывы: