Asus P5M2 Скачать руководство пользователя страница 73

Страница: 73 / 189

Chapter 4: BIOS setup

Recovering the BIOS from the support CD

To recover the BIOS from the support CD:

1. Remove any floppy disk from the floppy disk drive, then turn on the system.
2. Insert the support CD to the optical drive.

3. The utility displays the following message and automatically checks the

floppy disk for the original or updated BIOS file.

4. Restart the system after the utility completes the updating process.

The recovered BIOS may not be the latest BIOS version for this motherboard.

Visit the ASUS website (www.asus.com) to download the latest BIOS file.

Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...

Floppy not found!

Checking for CD-ROM...

CD-ROM found!

Reading file “I8043A0.ROM”. Completed.
Start flashing...

When no floppy disk is found, the utility automatically checks the optical drive

for the original or updated BIOS file. The utility then updates the corrupted

BIOS file.

Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...

DO NOT shut down or reset the system while updating the BIOS! Doing so can

cause system boot failure!

Содержание P5M2






























































































































































































Результаты поиска

Содержание P5M2

Отзывы:

Asus P5M2, Руководство пользователя, Страница: 73 / 189

Результаты поиска

Содержание P5M2

Отзывы: