Asus P5M2 Скачать руководство пользователя страница 42

Страница: 42 / 189

2-20

Chapter 2: Hardware information

2.5.4 PCI/PCI-X slots

The PCI and PCI-X slots support cards

such as a LAN card, SCSI card, USB

card, and other cards that comply with

PCI/PCI-X specifications.

2.5.5 PCI Express x16 slot (x8 link)

The onboard PCI Express x16 slot

provides the x8 link. It is designed for

high performance add-on cards such as

SCSI card, RAID card.

PCI Express x16 slot

A PCI Express x16 graphic card inserted to the onboard PCI Express x16 slot

may run only at x1 speed (Intel spec.). Make sure the installed PCI Express x16

graphic card support the downgrade x1 speed before you make a purchase.

PCI-X slots

PCI slot

•

When installing an optional ZCR card for P5M2/SAS onboard LSI1068 SAS

controller, install the card on PCI_X2 slot that is colored green.

• The optional ZCR Card for P5M2/SAS onboard LSI 1068

SAS Controller is LSI MegaRAID SAS 8300XLP. For detailed

specifications, refer to:

http://www.lsilogic.com/storage_home/products_home/internal_raid/

megaraid_sas/megaraid_sas_8300xlp/index.html

Содержание P5M2






























































































































































































Результаты поиска

Содержание P5M2

Отзывы:

Asus P5M2, Руководство пользователя, Страница: 42 / 189

Результаты поиска

Содержание P5M2

Отзывы: