Asus P5M2 Скачать руководство пользователя страница 182

Страница: 182 / 189

ASUS P5M2 Series

-1

6.4

Management applications and

utilities installation

The support CD that came with the motherboard package contains the drivers,

management applications, and utilities that you can install to avail all motherboard

features.

The contents of the support CD are subject to change at any time without

notice. Visit the ASUS website (www.asus.com) for updates.

6.4.1 Running the support CD

Place the support CD to the optical drive. The CD automatically displays the

Drivers menu if Autorun is enabled in your computer.

If Autorun is NOT enabled in your computer, browse the contents of the support

CD to locate the file ASSETUP.EXE from the BIN folder. Double-click the

ASSETUP.EXE

to run the CD.

6.4.2 Drivers menu

The Drivers menu shows the available device drivers if the system detects installed

devices. Install the necessary drivers to activate the devices.

The screen display and driver options vary under different operating system

versions.

Содержание P5M2






























































































































































































Результаты поиска

Содержание P5M2

Отзывы:

Asus P5M2, Руководство пользователя, Страница: 182 / 189

Результаты поиска

Содержание P5M2

Отзывы: