Asus Maximus iv extreme rev 3 Скачать руководство пользователя страница 170

Страница: 170 / 196

4-26

Chapter 4: Software support

Intel

Smart Response Technology

Intel

Smart Response Technology boosts overall system performance. It uses

an installed fast SSD (min 18.6GB available) as a cache for frequently accessed

operations, speeding up hard drive/main memory interaction. Key benefits are

expedited hard drive speeds, reduced load and wait times, and maximized storage

utilization. Power consumption also goes down by reducing unnecessary hard

drive spin.

1. Click

Accelerate

to launch Smart

Response Technology settings.

To install Intel

Smart Response Technology:

1. Place the support DVD to the optical drive. The Drivers installation tab

appears if your computer has enabled the Autorun feature.

2. Click the Drivers tab, then click Intel

Rapid Storage Technology Driver

software.

3. Follow the onscreen instructions to complete installation.

To use Intel

Smart Response Technology:

• Intel

Smart Response Technology supports Windows

7/ Vista operating

systems.

• Intel

Smart Response Technology is supported by 2nd generation Intel

Core™ processor family.

• Operating systems must be installed on the HDD to launch Intel

Smart

Response Technology. The capacity of the SSD is reserved for caching

function.

• Before applying Intel

Smart Response Technology, set the

SATA Mode

BIOS item to [RAID mode] in BIOS setup. Refer to section

3.5.4 SATA

Configuration for details.

Содержание Maximus iv extreme rev 3





































































































































































































Результаты поиска

Содержание Maximus iv extreme rev 3

Отзывы:

Бренды по названию

Популярные бренды

Asus Maximus iv extreme rev 3, Руководство пользователя

Результаты поиска

Содержание Maximus iv extreme rev 3

Отзывы:

Бренды по названию

Популярные бренды