Asus MAXIMUS III FORMULA Скачать руководство пользователя страница 163

Страница: 163 / 172

ROG Maximus III Formula

5-5

5.2

NVIDIA

SLI™ technology

The motherboard supports the NVIDIA

SLI™ (Scalable Link Interface) technology

that allows you to install multi-graphics processing units (GPU) graphics cards.

Follow the installation procedures in this section.

5.2.1

Requirements

•

In SLI mode, you should have two identical SLI-ready graphics cards that are

NVIDIA

certified.

•

Ensure that your graphics card driver supports the NVIDIA SLI technology.

Download the latest driver from the NVIDIA website (www.nvidia.com).

•

Ensure that your power supply unit (PSU) can provide at least the minimum

power required by your system. See Chapter 2 for details.

5.2.2

Installing two SLI-ready graphics cards

The following pictures are for reference only. The graphics cards and the

motherboard layout may vary with models, but the installation steps remain the

same.

1. Prepare two SLI-ready graphics

cards.

2. Insert the two graphics card into the

PCIEX16 slots. If your motherboard

has more than two PCIEX16 slots,

refer to Chapter 2 in this user

manual for the locations of the

PCIEX16 slots recommended for

multi-graphics card installation.

3. Ensure that the cards are properly seated on the slots.

• We recommend that you install additional chassis fans for better thermal

environment.

• �isit the N�IDIA zone website (http:��www.nzone.com) for the latest certified

graphics card and supported 3D application list.

Содержание MAXIMUS III FORMULA













































































































































































Результаты поиска

Содержание MAXIMUS III FORMULA

Отзывы:

Похожие инструкции для MAXIMUS III FORMULA

Бренды по названию

Популярные бренды

Asus MAXIMUS III FORMULA, Руководство пользователя

Результаты поиска

Содержание MAXIMUS III FORMULA

Отзывы:

Похожие инструкции для MAXIMUS III FORMULA

Бренды по названию

Популярные бренды