Asus AW1500-S5 Скачать руководство пользователя

Страница: 14 / 56

1-2

ASUS AW1500-S5

1.1

System Features

The ASUS AW1500-S5 workstation is a stylish server system featuring
the ASUS PP-DLW motherboard. The server supports the Intel

Xeon

™

processor in a 604-pin socket, and includes the latest I/O, LAN, and
video technologies through the chipsets embedded on the
motherboard.

The following are highlights of the workstation’s many features:

Chassis

Pedestal or rackmount 5U with removable front door bezel and
chassis foot stand or roller-wheels.

Motherboard

ASUS PP-DLW

Chipset

North Bridge:

Intel

E7505 North Bridge (Placer)

South Bridge:

Intel

82801DA South Bridge (ICH4)

64-bit PCI-X Bridge:

Intel

82870P2 (P64H2)

System Memory

Memory Capacity:

4 x 184-pin PC2100 DDR RAM sockets.
Each RAM supports registered ECC/
unbuffered DDR DIMMs for a total
of 2GB up to 8GB maximum capacity

Processor

Dual Intel

Xeon

processor up to 3.06 GHz frequency.

(Socket 604 Prestonia x 2) with 533Mhz FSB support with 35º
ambient and 85% CPU utilization.

Expansion Slots

AGP Slot:

1 x AGP 8X Pro (1.5V)

64-bit PCI slot:

1 x PCI-X 133MHz slot
3 x PCI-X 66MHz slots

32-bit PCI slot:

1 x 32-bit 33MHz 5V PCI slot

Содержание AW1500-S5

























































Результаты поиска

Содержание AW1500-S5

Отзывы:

Похожие инструкции для AW1500-S5

Бренды по названию

Популярные бренды

Asus AW1500-S5, Руководство пользователя

Результаты поиска

Содержание AW1500-S5

Отзывы:

Похожие инструкции для AW1500-S5

Бренды по названию

Популярные бренды