Asus A8N-SLI SE Скачать руководство пользователя страница 32

Страница: 32 / 152

2-8

Chapter 2: Hardware information

2.3.3 Installing the heatsink and fan

The AMD Athlon™ 64FX, AMD Athlon™ 64X2 or AMD Athlon 64™ processor

require a specially designed heatsink and fan assembly to ensure optimum

thermal condition and performance.

Follow these steps to install the CPU heatsink and fan.

1. Place the heatsink on top of the installed CPU, making sure that the

heatsink ﬁts properly on the retention module base.

Retention Module Base

CPU Heatsink

Retention bracket lock

Retention bracket

Make sure that you use only qualiﬁed heatsink and fan assembly.

• The retention module base is already installed on the motherboard

upon purchase.

• You do not have to remove the retention module base when

installing the CPU or installing other motherboard components.

• If you purchased a separate CPU heatsink and fan assembly, make

sure that a Thermal Interface Material is properly applied to the CPU

heatsink or CPU before you install the heatsink and fan assembly.

Your boxed CPU heatsink and fan assembly should come with installation

instructions for the CPU, heatsink, and the retention mechanism. If the

instructions in this section do not match the CPU documentation, follow

the latter.

CPU Fan

Содержание A8N-SLI SE

























































































































































Результаты поиска

Содержание A8N-SLI SE

Отзывы:

Бренды по названию

Популярные бренды

Asus A8N-SLI SE, Руководство пользователя

Результаты поиска

Содержание A8N-SLI SE

Отзывы:

Бренды по названию

Популярные бренды