Asus A8N-SLI SE Скачать руководство пользователя страница 135

Страница: 135 / 152

ASUS A8N-SLI SE

5-29

5.5

Creating a RAID driver disk

A ﬂoppy disk with the RAID driver is required when installing Windows

2000/XP operating system on a hard disk drive that is included in a RAID

set.
To create a RAID driver disk:

1. Place the motherboard support CD into the CD-ROM drive.
2. When the Drivers menu appears, select the RAID driver disk you want

to create:

• Click Make NVIDIA RAID Driver to create an NVIDIA

RAID

driver disk.

Browse the contents of the support CD to locate the driver disk

utility.

• Go to \Drivers\Chipset\WINXP_2K\Driver_Disk for the

NVIDIA

RAID driver disk utility.

3.   Insert ﬂoppy disk to ﬂoppy disk drive.
4.   Follow succeeding screen information to complete process.
5.  Write-protect the ﬂoppy disk to avoid computer virus infection.

To install the RAID driver:

1. During the OS installation, the system prompts you to press the F6

key to install third-party SCSI or RAID driver.

2. Press <F6> then insert the ﬂoppy disk with RAID driver into the ﬂoppy

disk drive.

3. Follow the succeeding screen instructions to complete the installation.

Refer to section “5.2.2 Drivers menu” for details.

Due to chipset limitation, the Serial ATA ports supported by the NVIDIA

chipset doesnʼt support Serial Optical Disk Drives (Serial ODD) under

DOS.

Содержание A8N-SLI SE

























































































































































Результаты поиска

Содержание A8N-SLI SE

Отзывы:

Бренды по названию

Популярные бренды

Asus A8N-SLI SE, Руководство пользователя

Результаты поиска

Содержание A8N-SLI SE

Отзывы:

Бренды по названию

Популярные бренды