Asus A8N-SLI SE Скачать руководство пользователя страница 128

Страница: 128 / 152

5-22

Chapter 5: Software support

5.4.2 NVIDIA

RAID configurations

The motherboard includes a high performance IDE RAID controller

integrated in the NVIDIA

SLI southbridge chipset. It supports RAID 0, RAID

1, RAID 0+1, and JBOD with four independent Serial ATA channels.

Setting the BIOS RAID items

After installing the hard disk drives, make sure to set the necessary RAID

items in the BIOS before setting your RAID conﬁguration.
To set the BIOS RAID items:

1. Boot the system and press <Del> during the Power-On Self-Test

(POST) to enter the BIOS Setup Utility.

2. From the Advanced > Onboard Devices Conﬁguration > NVRAID

Conﬁguration menu item in the BIOS set the RAID Enabled item to

Enabled. The succeeding items become user-conﬁgurable.

3. Select and enable the IDE or SATA drive(s) that you want to conﬁgure

as RAID. See section “4.4.3 Onboard Devices Conﬁguration” for

details.

4. Save your changes and Exit Setup.

For detailed descriptions on the NVIDIA® RAID conﬁguration, refer to the

“NVIDIA

RAID Userʼs Manual” found in your motherboard support CD.

Содержание A8N-SLI SE

























































































































































Результаты поиска

Содержание A8N-SLI SE

Отзывы:

Бренды по названию

Популярные бренды

Asus A8N-SLI SE, Руководство пользователя

Результаты поиска

Содержание A8N-SLI SE

Отзывы:

Бренды по названию

Популярные бренды