Astute Medical ASTUTE140, Руководство пользователя

Страница: 59 / 86

ASTUTE140 ® Meter
ASTUTE140
®
Meter Operation
©Astute Medical, Inc. 2021 PN 300005 Rev G 2021/03/03
59
8. When prompted, place the prepared Test cartridge into the recess inside the ASTUTE140
®
Meter drawer. Gently close the drawer until it clicks.
9. After closing the drawer, a temporary screen will appear indicating that the ASTUTE140
®
Meter is running the LQC procedure and the amount of time remaining until test completion
will be displayed.
10. When the LQC procedure completes, the results will be displayed along with the word
Passed if the procedure passed or Failed if it did not. If the LQC procedure failed, run the
LQC procedure again following the steps below:
a. Press the right soft key to display the Options pop-up menu.
b. Use the key to highlight Next Control and press the right soft key.
c. Repeat steps 4–9 using a freshly prepared Test cartridge. When the LQC procedure
completes, the results will be displayed along with the word Passed if the meter
passed the LQC procedure or Failed if it did not. If the procedure failed a second
time, contact Technical Support (See “Contacting Technical Support ” on p. 7 for
contact information).
11. Press the key to the left of the LCD screen to open the ASTUTE140
®
Meter drawer.
Remove the cartridge and discard according to the laboratory’s standard practices for the
type of biological sample used.
12. To manually print the LQC results if Autoprint is disabled:
a. Press the right soft key to display the Options pop-up menu.
Figure 64.
Running LQC