AstronSCIENTIFIC ROTARION EyepieceWheel, Инструкция по эксплуатации

Страница: 9 / 47

Once the 2 eyepieces with the greatest and the smallest
number of mm and the 2 intermediate have been selected
according to their best proportional scaling, you will align
them from lower magnification (largest mm) to higher
magnification (smallest mm) to verify their differences in
height between them.
The difference in heights between the eyepieces should be
compensated by combining the 5mm, 10mm, and 20mm
M42v0,75 Extenders supplied in the ROTARION threaded
to 3 of the 4 supplied Baader Click-Locks.
You select the largest height eyepiece (in this case the
17mm) corresponding to position number 3 in the series of
4 eyepieces on this page, we will place it in port [PORT-3]
of the ROTARION, corresponding to the Hour 6 of a
traditional clock, unscrewing first the "Extenders"
mounted under the Baader Click-Lock.
1. Unscrew Extenders from 5mm, 10mm and 20mm of
the Baader Click-Lock.
Extenders:
5mm
10mm
20mm
Baader
Click-Lock
1,25”
28mm
17mm
m
8mm
40mm
m