AstronSCIENTIFIC ROTARION EyepieceWheel, Инструкция по эксплуатации

Страница: 12 / 47

6. Note in the drawing of the previous point 5, that the
eyepiece of 8mm mounted in the Baader Click-Lock is
not equal in height to the 17mm eyepiece. Using a
combination of 5mm, 10mm and 20mm available
Extenders, you threaded them into the Click-Lock
Baader of the 8mm eyepiece to match the height of
the 17mm eyepiece. In this case you only need to use
the 20mm Extender, not using the 5mm Extender and
the 10mm Extender. Once the eyepiece has been
installed in its Baader Click-Lock, you proceed to hold
the eyepiece by turning the central part of the Click-
Lock in the clockwise direction, as in the previous
drawing in step number 5.
7. You continue to mount the remaining eyepieces. In
this example, you mount the 28mm eyepiece to the
[PORT-2] port of the ROTARION, corresponding to the
Hour 3 position of a traditional clock, using the extra
"Extenders" to equal the heights of the already
mounted eyepieces. In this case, you only use the
"Extender" of 5mm.
17mm
m
8mm