ASTRO VG-870B, Инструкция по эксплуатации

Страница: 452 / 579

434
<Program categories for Type>
1-Program:
Select this when copying stored programs in
their original form.
1-SAMPLE TIM&PAT->Program:
When combining the timing data and pattern
data among the internal sample data to create a
program
1-TIM (Timing/Output/Audio):
When the timing data of the source program is to
be combined with the pattern data of the
destination program and the existing program is
to be overwritten by the program thus created
* This setting cannot be used when the
program does not exist at the destination
end.
1-PAT (Pattern/Action):
When the pattern data of the source program is
to be combined with the timing data of the
destination program and the existing program is
to be overwritten by the program thus created
* This setting cannot be used when the
program does not exist at the destination
end.
Multiple-Program:
Select this when copying a multiple number of
programs.
<Differences in the settings from one type of data to
another>
1-Program
Select the source and destination program numbers and
the media.
1-SAMPLE TIM&PAT->Program
Select the timing or pattern data number among the internal
sample data to serve as the source, and select the program
number and media to serve as the destination.
1-TIM(Timing/Output/Audio)
Select the program number and media for the timing data
to be used as the source, and select the program number
and media for the pattern data to be used as the
destination.
1-PAT(Pattern/Action)
Select the program number and media for the pattern data
to be used as the source, and select the program number
and media for the timing data to be used as the destination.
1-Multiple-Program
Select the range of the source and destination program
numbers and the media.
(4)
Select EXECUTE using or
INC
DEC
,
and then press
SET
to complete the copying.