Accessories
14
X-BC … Buscontroller
X- BC 1
The headend bus controller is for centrally setting all bus-capable headend devices via PC. Maintenance and
re-programming of already set up headends can be done via modem.
Operation is only possible with the HE programming software!
G
Control of up to 240 bus-capable headend devices
G
Can be individually set, from ring tone to call reception (i.e. parallel operation with other terminals is possible)
G
8-digit identification code protects against unauthorized remote access
G
Internal monitoring timer protects against excessive telephone charges (automatic hang-up if there is no communicati-
on within five minutes)
G
Operating software can be updated via serial interface (i.e. software updates without installation work)
X-BC 2 – additional features
G
Remote control via GSM modem
G
Error messaging via SMS (alarm messaging to max. 3 phone numbers)
G
4 time partitions can be set (for each time partition 6 switching times can be defined)
X- BC 1
X- BC 1
rearpanel
KC 3
Typ
X-BC 1
X-BC 2
Order no.
330401
330400
Supply voltage
[DC]
6 V
through plug-in power supply unit
(230V~/50Hz)
Current consumption
[mA]
35
Permitted ambient temp.
[°C]
-15 … +50
KC 3 external programming unit
for programming all setting parameters (order no.: 330 650)
