Page 17
Programming with the KC 3
Operating Instructions V 112 -
Version 07-2009A
HINWEIS
:
Instead of setting the output frequency you can
set the channel in line 4 of the display. To do this, Press the
or
cursor button to get to the fourth line. Select the channel
you require by pressing the
or
cursor button.
E
RGEBNIS
:
You have now set the picture carrier and can proceed to select the
audio modulation.
A
UFGABE
1.
Select line 3 by pressing cursor button
or
until the cursor
sits in line 3
2.
Press the
Menu / Read
button until you reach the audio
modulation submenu (AudioMod) (see left).
3.
Select one of the four options ("Stereo”, "Mono”, "Dual L (R)”,
"Dual R (L)”) by pressing the
or
cursor button until you
reach the setting you require.
4.
Press the OK / Store button to save the setting.
E
RGEBNIS
:
You have now set the audio modulation and can proceed to enab-
ling / disabling the output signal.
A
UFGABE
1.
Select line 3 by pressing cursor button
or
until the cursor
sits in line 3.
2.
Press the
Menu / Read
button until you reach the output
signal submenu (
OutpSignal
) (see left).
3.
Use the
and
cursor buttons to switch it "On“ (see left,
output enabled) or "Off“ (output disabled).
4.
Press the
OK / Store
button to save the setting.
E
RGEBNIS
:
You have now enabled/disabled the output signal. You can now get
the display to show any error messages that may exist.
