ASTRO U 158, Руководство по эксплуатации

Страница: 9 / 60

page 9
Connecting and installing the module
Operating manual U 158 - Version 10-2018A
To prepare the backplane for installation, proceed as follows:
Plug the jumper into the installation position provided in accordance with figure 2
(page 7).
HINWEIS
:
A jumper which has not been correctly plugged into the corresponding installa-
tion position will result in incorrect LED displays on the front of the U 100 base unit (see section
“Device description”). Furthermore, the correct position cannot be displayed on the web
browser user interface.
[1, 2] Phillips-head screws
[3] Cable for signal supply
[4] Cable for power supply
You can now install the backplane in the base unit. To do so, proceed as follows:
Figure 3: Installing the backplane in the base unit
1
2