ASTRO U 158, Руководство по эксплуатации

Страница: 15 / 60

page 15
Quick start - starting operation of the U 158
Operating manual U 158 - Version 10-2018A
Configuring the IP receiver
Now start configuring a signal path in the U 158. Start by clicking on the item “IP RX 1” in the web
browser interface menu. You will now see the following table:
Figure 8: Setting the source for the data stream
Enter the IP address and port for the data source in the first line. Optionally, you can also enter a
source select address in the second line.
Further information about configuring the receiver can be found in the section “Configuring IP inputs”.
There is another table below the “IP RX 1 Channel Settings” table. Activate the radio button “on” to
enable the receiver.
Figure 9: Activating the connection to the data port
Checking the data reception rate
Now click on the menu item “Status” in the menu at the left. You will now see the following overview:
Figure 10: Displaying reception statistics
A data reception rate > 0 at data ports A or B should now appear in the line “Receive” in the “Ethernet”
table.