manualshive.com logo in svg

ASTRO SP-8848, Инструкция по эксплуатации

Поделиться
Скачать
ASTRO SP-8848 Скачать руководство пользователя страница 72

 

 

2.8. Creating and editing the auto display data 

 

This section describes how the VG's auto display data is set. The VG auto display data can be 
created and edited, edited auto display data can be sent to the VG and registered on the panel 
ROM or memory card, and auto display data from the VG can be received. 

2.8.1. Startup method 

Click the [Auto Disp] button of "VGBase" to start up the "Auto Display Editor." 

2.8.2. Window screen and description 

 

⑦

 

⑥

 

④

 

⑤

 

③

 

②

 

①

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No. 

Item name 

Details 

① 

Neme 

The name of the auto display data is set here.

 

② 

Auto Display 

The auto display data which has been set is displayed here.

 

③ 

All Clear/Clear 

These buttons are used to clear the program data on the auto display data 
list.

 

④ 

Interval 

The interval of the auto display data is set here.

 

⑤ 

Edit 

When this button is clicked, the "Program Layout Editor" program data 
registration dialog box appears.

 

⑥ 

Program in Layout 

The program data registered in the layout is displayed here.

 

⑦ 

Set 

This button is used to register the selected program data on the [Auto 
Display] line selected.

 

 

 

 

64

Содержание SP-8848
































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды