ASTRO SP-8848 Скачать руководство пользователя страница 25

Страница: 25 / 127

Chapter 2 Operation

Help

Help details are displayed by pressing the

button.

Tool buttons

Show Err:

When

the

button is clicked, the error window is displayed. Check the values of the

data which has been set. If a value outside the setting range has been input, which data contains

the error is indicated on the error description display screen.

Execute:

When the

button is clicked, the program data now being edited is executed

without its being registered in the VG.

Load:

When

the

button is clicked, the program data is loaded.

Save:

When the

[Save] button is clicked, the program data is saved in the file and any

existing data in that file is overwritten.

Save As:

When

the

button is clicked, the program data is saved in the file.

Send

When

the

button is clicked, the program data now being edited is sent to the VG.

Receive:

When the

button is clicked, the program data is received from the VG.

Print

When

the

button is clicked, the program data is printed.

Close:

When the

button is clicked, the program whose data has been edited is closed.

Содержание SP-8848
































































































































Результаты поиска

Содержание SP-8848

Отзывы:

ASTRO SP-8848, Инструкция по эксплуатации, Страница: 25 / 127

Результаты поиска

Содержание SP-8848

Отзывы: